Low Voltage 【Back】
 

 

 

 
 
　
Home  >> Products >> Low Voltage >> Tool & Power Fitting---Page2 >> Hydraulic Punch Driver
   
Hydraulic Punch Driver
 

HB-150W

    
     
 

3 in 1 Bus Bar Processor
3 in 1 bus bar processor for cutting, punching and bending of copper bus bar and aluminum bus bar
It is designed for irregular sized bus bar procession on Mid small scaled transformer, switchboard bor  line or assembling site .
Punch holes without burr. Cutting surface smooth and cutting angle accurately. it’s good for puick and  repeat batch procession.
Four war valve control switch accurately guide to the position of punching, bending and cutting
Safe and firm pedal switch could control oil inlet and oil return
   
 
   
     

Specification

Cutting, punching, horzontal bending ,erective bending

Input voltage/control voltage

Single phase 50Hz,220V

Rating working oil pressure 700kg/cm2

Over pressure safety valve setting value

Outlet force of bus bar cutter

15ton

Bus bar cutting capability

(Copper bus bar /aluminum bus bar)150mm ×12mm

Outlet force of puncher

31ton

The distance between hole centre and bus bar edge

70mm

Punching capability-copper bus bar /aluminum bus bar

ø6-ø20.5(Max.Thickness):13mm

Standard assembled punching dies

ø10.5, ø13.5, ø17.5, ø20.5mm

Outlet force of bender

15ton

Horizontal bending capability

150 × 12mm

Weight

150kg

Dimension of moveable workbench

800mm(L)600mm×(W)×770mm(H)
     
     

DHY-150 / DHY-200

  
     

With three functions
(cutting, punching and bending)

  
     
     

DHY-150

DHY-200

Voltage:

single phase 50Hz,220V

single phase 50Hz,220V

Rating pressure:

700kg/cm2

700kg/cm2

Cutting force :

20T

30T

Cutting range :

150mm(width)_10mm(thickness)

200mm(width)×10mm(thickness)

Punching force:

30T

35T

Distance from hole to sheet side:

95mm

95mm

     
     

 

    
 

 
  【Back】

Copyright ©. Sunfad Electrical Group Co., Ltd. All Rights Reserved